Dual-purpose hybrid-cooler for VGA or CPU cooling.
Patented VFP(Variable Fin Profile) technology with fan-embedded heatsink for optimized cooling efficiency, and maximized dissipation area for superior performance.
Four high performance heatpipes for fast heat transfer.
Thin(0.3mm) & pure aluminum fins for lightness and excellent cooling performance.
High-capacity 92mm LED fan for outstanding cooling performance and cool aesthetics.
Cools not only the VGA/CPU, but the surrounding components for enhanced system stability.
FanMate 2 fan controller included for user control of noise and performance.
Does not generate noise or vibration in Silent Mode.
Dimensions 126(L) x 110(W) x 45(H) mm
Weight 290g
Base Material Dissipation Fins : Pure Aluminum
Base : Pure Copper, Heatpipe : Pure Copper
Dimensions 92(L) x 92(W) x 15(H) mm
Bearing Type 2 Ball-Bearing
Speed Silent Mode 1,400rpm ± 10 % Normal Mode 2,350rpm ± 10 %
Noise Level Silent Mode 19.0dBA ± 10 % Normal Mode 29.0dBA ± 10 %
AMD(ATI)
Radeon HD 4890 Series
Radeon HD 4870 Series
Radeon HD 4850 Series
Radeon HD 4830 Series
Radeon HD 3870 Series
Radeon HD 3850 Series
Radeon HD 2600XT(DDR4) Series
Radeon X1950 Series
Radeon X1900 Series
Radeon X1800 Series
NVIDIA
Geforce 9800GT Series
Geforce 9600GT, GSO Series
Geforce 9500GT, 9400GT Series
Geforce 8800GT, GS, GTS(G92) Series
Geforce 8600GT, 8500GT Series
Geforce 7950 Series (except GX2)
Geforce 7900, 7800, 7600 Series
Geforce 6800, 6600 Series (except 6600 AGP Series)
Quadro FX Series (except 4600, 4700X2, 5600 Series)
Socket CPU CPU Compatibility Using Clip Compatible
Motherboard InCompatible
Motherboard
Intel 775 Celeron D Supports all speeds Clip A
Pentium D Prescott Up to 540
Cedar Mill Up to 650
Core 2 Duo Supports all speeds
Core 2 Quad
AMD AM2+ Phenom X4 Up to 9850 Clip B
Phenom X3 Supports all speeds
Sempron Supports all speeds
AM2 Sempron Supports all speeds
Common Components
- One (1) VF2000 Cooler
- Four (4) Springs
- Four (4) Fixing Nuts
- Two (2) Thermal Grease
- One (1) PVC Washer Plate
- One (1) Fan Controller (FAN MATE 2)
- One (1) Cable for FAN MATE 2
- One (1) Double-Sided Tape (to attach FAN MATE 2)
- One (1) User’s Manual
VGA Components
- Eight (8) RAM Heatsinks
- Four (4) Nipples A
- Four (4) Rubber Rings A
CPU Components
- Two(2) Intel Socket 775 Clips A
- Two(2) AMD Socket AM2/AM2+Clips B
- Four (4) Bolts
- Four (4) Nipples B
- Four (4) Rubber Rings B
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
By installing this product on a VGA (Video Graphics Array) card, two PCI slots adjacent to the PCIe (or AGP) slot occupied by the VF2000 will become unusable.
The product CANNOT be installed on Matrox VGA cards, NVIDIA PCX 5*** , NVIDIA Geforce 6600 AGP Series, Geforce 7600/7900 AGP Series, and ATI Radeon 9550/9600 begin_of_the_skype_highlighting 9550/9600 end_of_the_skype_highlighting Series, any cards with less than four installation holes, and any cards with a diagonal installation hole distance that is not 75.2mm.
To properly install the cooler onto a CPU, please remove the motherboard from the case and install the VF2000 so that the ends of the cooler’s heatpipes are directed towards the case’s exhaust fan.
If the VGA card and/or its components interfere with the installation of this product, then stop the installation, refer to the list of compatible VGA cards or motherboards at Zalman’s website, and install this product with one of the compatible VGA cards or motherboards.
If this product is to be installed on a recently released VGA card, please check for compatibility at Zalman’s website first.
The use of an exhaust fan positioned on the rear side of the case is recommended for enhanced product performance.
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or any irritation persists, seek medical attention.
Excessive force exerted on the cooler may cause damage to the cooler and/or system.
Avoid inserting objects into the fan while it is in operation.
Zalman is not responsible for any damages caused by overclocking.
During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system.
Product design and specifications may be revised to improve quality and performance.
